The Do’s and Don’ts of Care and Maintenance of Fire Hoses

industrial valve suppliers
5 Key Things to Look for When Selecting an Industrial Valve Supplier
September 8, 2021
Hydrant Valves


Fire hydrants are used by firefighters to put the fire out of flames. Firefighters need valves from reliable hydrant valves suppliers for effective results. They remove one or two nozzles, fasten hoses and turn the valves. This will allow the proper flow of water. Depending upon the hydrant’s body and type of nozzle, they will know how much pressure they have.

A fire hose made by fire hose suppliers is one of the vital items used for defense in firefighting. When you use hoses, it is important to take proper care of the hoses. All safety items are subject to attentive standards of safety and reliability.

Taking good care of your fire hoses might help you get their life stretched for more years. A fire hose can have a useful life of 10–20 years if it is maintained properly. Of course, more frequent use may shorten the life of your fire hoses, but proper fire hose maintenance will help you keep them running at peak efficiency for longer.


  • Check the hose for wear or damage after each use. If you notice dirt, wash the hose with warm and soapy water. You can also use a scrub brush so that it is cleaned properly. If you don’t want to do these efforts, you can simply wash the hose with water.
  • When you have finished using the hose, roll it and store it in a protected area out of the sun. Long exposure to the sun will harm the hose, and the life of the hose will decrease. Keep them rolled up in the off-season, as animals can damage the hose. Rolled-up hoses also avoid accidents.
  • Let the hoses dry after use. This point goes with if the hose is 100% polyester. Because polyester isn’t prone to mold or mildew, which all current hose is coated to resist. It is not required for the hose to be dry completely. If the hose is being prepared for seasonal storage or will be stored in cold temperatures, it is extremely vital to dry it.
  • Store the rolled hoses in a secure and flat area.
  • Keep hoses in the area where they are easily accessible. In case of any emergency, you can quickly grab it.
  • To extend the life of your hoses, rotate their placements with other hoses in the hose lay. It is the same concept as rotating the tires on your car.


  • As the lining can split from the cloth, use high-pressure washers. To clean the hose, use moderate water pressure.
  • Hoses need to breathe, so don’t store them in a container. This applies to the off-season as well.
  • In the winter or off-season, don’t store near heat sources.
  • Hoses are dragged. Dragging hoses across rough terrain causes abrasion and snagging, which is one of the leading causes of hose deterioration.

Leave a Reply

Your email address will not be published. Required fields are marked *